WHYNTER ENERGY STAR 50 PINT PORTABLE DEHUMIDIFIER WITH PUMP Model # : RPD-501WP INSTRUCTION MANUAL Congratulations on your new Whynter product. To ensure proper operation, please read this Instruction Manual carefully before using this product. Keep this manual in a safe place for future reference.
DISPOSAL INFORMATION Thank you for choosing the Whynter Portable Dehumidifier. Please follow the instructions provided in this user guide to obtain the very best performance from your dehumidifier. We trust that your Whynter dehumidifier will provide the performance and reliability that we stand for. Your Whynter dehumidifier is designed to remove moisture in the air by condensation removal and collecting the condensation water in the drain bucket or draining through a drain hose.
TABLE OF CONTENTS PAGE DISPOSAL INFORMATION 2 SAFETY PRECAUTIONS 4 INTRODUCTION / TECHNICAL DATA 5 PARTS AND CONTROLS 6-9 OPERATION INSTRUCTIONS 10 - 11 WATER DRAINAGE INSTRUCTIONS 12 - 14 MAINTENANCE 15 TIPS ON WHEN TO USE YOUR PORTABLE DEHUMIDIFIER 16 TROUBLESHOOTING 17 - 18 WARRANTY INFORMATION 19 3
SAFETY PRECAUTIONS WARNING TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY WHEN USING YOUR PORTABLE DEHUMIDIFIER, FOLLOW THESE BASIC PRECAUTIONS: Read all instructions before using the appliance. Never clean appliance parts with flammable fluids. The fumes can create a fire hazard. Do not use an excessively wet cloth, industrial solvents, and oil-based products to clean this appliance.
INTRODUCTION How it Works When the dehumidifier is started, the fan begins to pull moisture-laden air across the dehumidifying coils. The coils condense or draw moisture from the air, and air flows through the top louver into the room as dry, warm air. Moisture removed from air is collected in a drain bucket on the front of the dehumidifier. The appliance is designed to operate between 41°F (5°C), and 96°F (35°C).
PARTS AND CONTROLS OTHER ACCESSORIES: 1. 20“ Continuous/ Gravity Drain hose 2. Continuous/ 6.75” Gravity Drain short hose and adapter 3. 16.5 ft. pump drain hose 4.
PARTS AND CONTROLS 1. Pump Button Press to activate the pump operation. The Pump indicator light will illuminate when water pump is in operation. Note: Make sure the pump drain hose is installed into the unit and the continuous/gravity drain assembly is removed from the unit before the pump operation is activated. The water pump function will start when the drain bucket is full. 2. Filter Button The check filter indicator is a reminder to clean the air filter for more efficient operation.
PARTS AND CONTROLS Energy Saver When the unit is running on normal operation, once the RH% is reached, the fan will still run continuously to avoid high start-up amperage which makes the unit energy-efficient . Please note that the fan may run continuously or shut off intermittently depending on the RH% and set humidity. 7. Timer Button Press to activate the Timer delay feature, in conjunction with the Down and Up Buttons.
PARTS AND CONTROLS Continuous Indicator Light To run the unit in continuous mode, press the Down button until the display reads 35%RH. Then press the Down button again until the display reads “CO” to initiate continuous operation and the Continuous indicator light will illuminate. To stop continuous operation, press the Up button and set the desired RH percentage value to resume normal operation. Display The display screen shows a number of different indications depending on the selection function.
OPERATION INSTRUCTIONS AIR FILTERS INSTALLATION Your Whynter portable dehumidifier is equipped with a 2 in 1 silver-coated washable pre-filter combo. This washable pre-filter removes large particles such as dust, pet hair and dander. The silver coating is designed to kill bacteria in the air and control the growth of microbes, such as viruses, fungi and spores. WARNING: NEVER OPERATE THE DEHUMIDIFIER WITHOUT THE FILTER START OPERATION 1. Ensure that the appliance is connected to the power socket. 2.
OPERATION INSTRUCTIONS POSITIONING THE UNIT This dehumidifier is intended for indoor residential applications only and should not be used for commercial or industrial applications. Place the dehumidifier on a smooth, hard and level floor strong enough to support the appliance with a full bucket of water. Do not attempt to roll the appliance over objects. Avoid placing the appliance in an area where the temperature will fall below 53°F.
WATER DRAINAGE INSTRUCTIONS Using a portable dehumidifier requires that collected water be emptied frequently. Draining water from this unit can be done in 3 different methods: 1. DRAIN BUCKET METHOD 1. The drain bucket can hold up to 14 pints of water. When the bucket is full, the Full indicator light will light. The compressor and fan will turn off, the Full indicator will light, and a P2 code will be displayed. 2. It is recommended to turn the unit off before removing the drain bucket. 3.
WATER DRAINAGE INSTRUCTIONS 2. CONTINUOUS / GRAVITY DRAIN METHOD Water can be automatically emptied into a floor drain by attaching the 20” continuous/gravity drain hose to the continuous/gravity drain outlet. To use gravity to drain your portable dehumidifier, it must be installed on a level surface or at least 12 inches above the ground, on a sturdy table or shelf unit. When using the function of continuous/ gravity drainage, your drain hose must be placed horizontally below the drainage hole.
WATER DRAINAGE INSTRUCTIONS 3. WATER PUMP METHOD One of the key features of this dehumidifier is that it has a water pump that pushes water up or over a longer distance. Using this feature will enable your unit to run maintenance free. NOTE: The water pump will ONLY engage when the drain bucket is full. 1. Make sure the continuous/gravity drain assembly is removed from the continuous/gravity drain outlet and the plastic cover is installed. 2. Insert the 16 ft.
MAINTENANCE Always turn off and unplug the dehumidifier before cleaning. 1. Cleaning the air grille and main unit Use a damp cloth to wrap the main unit or use water and a mild detergent. Do not use bleach, chemicals or abrasives. Do not splash water directly onto the unit. Doing so may cause an electrical shock, cause the insulation to deteriorate, or cause the unit to rust. Use a vacuum attachment or brush to clean the air intake and outlet grilles. 2.
TIPS ON WHEN TO USE YOUR PORTABLE DEHUMIDIFIER If you have respiratory problems, asthma and allergies, your Whynter RPD-501WP portable dehumidifier is a great option for controlling moist environments. Creating dry air can keep indoor air pollutants at a more manageable level, especially when used in conjunction with an air purifier.
TROUBLESHOOTING Many common portable dehumidifiers problems are easily resolved. Try the troubleshooting suggestions below to see if the problems can be resolved before having to contact the service department. Problem The dehumidifier does not operate. Possible Causes Power failure / outage. The automatic switch, line fuse, or breaker has been tripped. The power supply voltage is too low. The power cord is damaged. The dryness level you selected has been reached.
TROUBLESHOOTING Many common portable dehumidifiers problems are easily resolved. Try the troubleshooting suggestions below to see if the problems can be resolved before having to contact the service department. Problem The dehumidifier leaks. The dehumidifier does not operate. Possible Causes Solutions Continuous/gravity drain hose is loose. Cracked drain bucket. Secure the drain hose. Power failure or outage. The automatic switch, line fuse, or breaker has been tripped.
ONE YEAR LIMITED WARRANTY This WHYNTER portable dehumidifier is warranted, to the original owner within the 48 continental states, for one year from the date of purchase against defects in material and workmanship under normal use and service.
