SDS

SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
Genetron® 410A
Version 2.3 Supersedes 1
Page 6 / 12
8.2.
Exposure controls
Occupational exposure controls
The Personal Protective Equipment must be in accordance with EN standards:respirator EN 136, 140,
149; safety glasses EN 166; protective suit: EN 340, 463, 468, 943-1, 943-2; gloves EN 374, safety
shoes EN-ISO 20345.
Environmental exposure controls
Handle in accordance with local environmental regulations and good industrial practices.
Personal protective equipment
Respiratory protection : Remarks: In case of insufficient ventilation wear suitable
respiratory equipment.
Hand protection : Glove material: Viton (R)
Gloves must be inspected prior to use.
Replace when worn.
Protective gloves against cold
(EN 511)
Remarks: Supplementary note: The specifications are based
on information and tests from similar substances by analogy.
Due to varying conditions ( e.g.temperature or other strains) it
must be considered that the usage of a chemical protective
glove in practice may be much shorter than the permeation
time determined in accordance with EN 374.
Since actual conditions of practical use often deviate from
standardised conditions according EN 374 the glove
manufacturer reccomends to use the chemical protective glove
in practice not longer than 50% of the recomended permeation
time.
Manufacturer´s directions for use should be observed because
of great diversity of types .
Suitable gloves tested according EN 374 are supplied e.g. from
KCL GmbH, D-36124 Eichenzell, [e-mail]
Eye protection : Safety glasses with side-shields conforming to EN166
Face-shield
Skin and body protection : Protective footwear
9. PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties
Revision Date 02.01.2017