Use and Care Guide

PARTS AND CONTROLS

5. Timer Button

Press to activate the Timer delay feature, in conjunction with the Timer Control Buttons.

 Timer Delay Switch Off

When the appliance is ON, press the Timer button to activate Auto-stop function and the Timer OFF

light will come on. Set the desired time delay OFF hours by pressing the and buttons. The time

increments are 1 hour up to 24 hours. When the delay time set has elapsed, the appliance switches off.

To cancel the delayed switch off function, set the time to “00” or turn off the appliance.

 Timer Delay Switch On

When the appliance is OFF, press the Timer button to activate Auto-start function and Timer ON light

will come on. Set the desired time delay ON hours by pressing the and buttons. The time incre-

ments are 1 hour up to 24 hours. When the delay time set has elapsed, the appliance turns on. To can-

cel the delayed switch on function, set the time to “00” or turn off the appliance.

 Timer Delay Switch On and Off Sequence

When the appliance is OFF, press the Timer button to activate Auto-start function and Timer light ON

will come on. Set the desired time delay ON hours by pressing the and buttons. Once Timer Delay

Switch On is placed, press the Timer button again to activate Auto-stop function and the Timer OFF

light will come on. Set the desired time delay OFF hours by pressing the and buttons. When the

delay time set has elapsed, the appliance switches off. To cancel the delayed switch off function, set

the time to “00” or turn off the appliance.

6. Humidity /Timer Control Buttons

 Humidity Set Control Buttons

The humidity level can be set within a range of 35%RH(Relative Humidity) to 85%RH in 5% increments. For

lower humidity level, press the button and set to a lower RH percentage value. For higher humidity level,

press the button and set to a higher RH percentage value. Once the RH% is set, the set RH% will stay on

the display for about 5 seconds then it will revert back to current RH%.

 Timer Set Control Buttons

If Timer Button is pressed, use the

and buttons to set the Auto Start and Auto Stop time from 0.0 hour to

24 hours.

7. Power Button

Press to turn the dehumidifier on and off

Energy Saver

When the unit is running on normal operation, once the RH% is reached, the fan will still run continuously to avoid

high start-up amperage which makes the unit energy-efficient . Please note that the fan may run continuously or

shut off intermittently depending on the RH% and set humidity.