Use and Care Guide

7
PARTS AND CONTROLS
1. Comfort Button
Press Comfort Button to activate Comfort Dehumidifying operation. The Comfort Dehumidifying indicator light will
come on when this mode is selected. In this mode, the unit will automatically control the room humidity in a com-
fortable range of 45%~55% according to the room temperature. The Humidity Control Buttons are automatically
disabled and the compressor will not stop unless the drain bucket is full, removed, or the humidity level reaches the
comfort range percentage.
2. Filter Button
The check filter indicator is a reminder to clean the air filter for more efficient operation. The filter light will illuminate
after approximately 250 hours of operation. To reset after cleaning the filter, press the Filter button and the light will
turn off.
3. Continuous Button
Press to activate the Continuous dehumidifying operation. The Continuous indicator light will illuminate when Con-
tinuous mode is in operation. In this mode, the unit will continue dehumidifying, regardless of the room’s humidity.
The Humidity Control Buttons are automatically disabled and the compressor will not stop unless the drain bucket
is full, or is removed. To stop continuous operation, press the Continuous (CONT.) Button and set the desired RH
percentage value to resume normal operation.
4. Turbo Button
Press the Turbo button to engage Turbo Fan mode. The Turbo indicator light will come on when this fan speed is
selected. Press the Turbo button again to set the unit to Normal Fan mode. The Turbo indicator light will turn off
when Normal Fan mode is activated.
Comfort
Buon
Filter
Buon
Connuous
Buon
Turbo
Buon
Timer
Buon
Power
Buon
Humidity /
Timer Control
Buon
Comfort Dehumidifying
Operaon indicator light
Clean Filter
indicator light
Auto Defrost on
indicator light
Connuous
Operaon
Indicator light
Turbo Fan
Indicator light
Bucket Full
Indicator light
Timer On and O
Indicator light
RH% and Timer
Display