Instructions / Assembly

8
Operation and Controls
OPERATING THE WINE REFRIGERATOR
Recommend Temperature Settings
It is recommended that you install the wine cabinet refrigerator in a place where the ambient temperature is
between
(68°F - 78°F). If the ambient temperature is above or below recommended temperatures, the performance
of the unit may be affected. For example, placing in extreme cold or hot conditions may cause interior
temperature to fluctuate thus the set temperature may not be achievable.
CONTROL PANEL
POWER
Press to turn ON appliance. To turn OFF, press and hold for 5 seconds.
SETTING THE TEMPERATURE
The temperature range can be set between 40ºF and 65ºF (5ºC and 18ºC ). To set the desired tempera-
ture, press the button to lower the temperature or but- ton to raise the temperature on the control
panel. The temperature display will flash for 5 seconds indicating that the desired tempera-
ture is set and will revert back to its actu- al internal temperature.
NOTE: The temperature inside the wine cabinet refrigerator is dependent on the ambient temperature
(room temperature).
INTERIOR LIGHT / ºC and ºF SELECTOR
You can turn on and off the interior light by pressing the Light button on the control panel. To change tem-
perature conversions, touch and hold for 5 seconds.
LEVELING THE APPLIANCE
It is important for your appliance to be leveled in order to work
properly. It can be raised or lowered by rotating each of the feet
on the bottom of the machine. If you find that the surface is not
level, rotate the feet until the appliance becomes level .You may
need to make several adjustments to level it. We recommend us-
Conservation 49 - 57ºF
Red Wines 62 - 72ºF
Dry/White Wines 48 - 57ºF
Rose Wines 49 - 51ºF