User Manual

 Pull out the plug before doing any maintenance on the unit to avoid electric shock.

 Never pull out plug when hands are wet!

 This unit is not intended for the storage of medicines or chemical reagents.

 Keep packing materials away from children.

 Condenser water from evaporator drains into a hole in the floor of the storage compartment and

is channeled into a drain pan located at the back of the unit on the compressor. Heat transferred

from the compressor evaporates any water that has collected in the pan. Be sure the drain hole

in the floor of the unit is clear and unobstructed.

 During long absences, remove the unit’s contents, unplug the unit, clean it and leave the door

open slightly to avoid possible formation of condensation, mold or odors. Use a cover to protect

the unit and prolong its lifespan.

 Leave disassembly and disposal of the unit to qualified experts.

ENERGY-SAVING TIPS



Do not place the unit next to a heating vent, a range or in direct sunlight.

 Keep the door closed as much as possible, especially in hot, humid weather.



Cover foods to reduce moisture buildup inside the appliance.

INSTALLATION

Installation Types

This refrigerator has been designed for free-standing, recessed, or built-in installation. In every case,

there must be adequate ventilation and access for service. Never install or operate the unit in an

enclosed area, such as a closed cabinet.

Free-standing installation:

A free-standing installation will allow you to install the refrigerator in any place you desire. You

must follow the stated instructions for

a – Electrical requirements

b – Location requirements of the refrigerator

Built-in installation:

If this method of installation is chosen, it will still be necessary to allow adequate ventilation

space around the unit (make sure there is at least some ventilation room for the back of the

unit). The following additional items must be observed.

Remove packaging materials and Cleaning

IMPORTANT: Do not remove any permanent instruction labels or the data label on your refrigerator.

 Remove the exterior and interior packaging. Use a soft dry cloth to wipe down the outside of the

refrigerator thoroughly. Use a clean cloth dampened with lukewarm water to wipe down the

inside of the refrigerator.

 Air must circulate freely in front of the refrigerator. Avoid placing the appliance

Risk of child entrapment. Before discarding your old refrigerator:

• take off the doors

• leave the shelves in place so that children may not easily climb inside.