User manual

PARTS IDENTIFICATION

Your portable air conditioner is supplied with a Leakage-Current Detection and Interruption (LCDI)

plug. This plug reduces the risk of fire due to arcing faults in the power supply cord. Please follow

the instructions below to ensure that LCDI plug works properly.

1. Plug the power cord to a grounded wall outlet. Do not plug to a power strip or extension cord.

2. Press the TEST button on the plug. This should trip the plug and cut the power to the air condi-

tioner. If the plug does not trip and the unit comes on, please contact technical support.

3. Press the RESET button to start the air conditioner.

4. Do NOT use the TEST and RESET buttons to turn the air conditioner on and off.

Leakage-Current Detection and Interruption (LCDI)

Operating Conditions

Mode Room Temperature

Cool

Higher than 64°F

Dry

Higher than 60°F

Heat

Higher than 45°F

ACCESSORY IMAGE ACCESSORY DESCRIPTION QUANTITY

Exhaust hose adapter to the unit 1 set

Exhaust hose 1 piece

Exhaust hose adapter to the window 1 set

Window slider kit 1 set

Clear plastic plug (plug is in the upper corner of

the plastic bag that holds the user manual)

1 piece

Foam seal A (Adhesive)

Foam seal B (Adhesive)

Foam seal C (Non-adhesive)

2 pieces

1 piece

Security bracket with 2 screws 1 set

Drain hose 1 piece

3M Filter (pre-installed on unit) 1 piece

Silvershield pre-filter (pre-installed on unit) 1 piece

Storage Cover

1 piece