Operation Manual

7
PARTS IDENTIFICATION
ACCESSORY IMAGE ACCESSORY DESCRIPTION QUANTITY
Exhaust hose
Window and Round Adaptor
1 set
Window sliders and Clear plastic plug (plug is in
the upper corner of the plastic bag that holds
the user manual)
1 set
Foam seal 3 pieces
Remote control and Batteries 1 set
Drain hose 1 piece
3M Filter (pre-installed on unit) 1 piece
Silvershield pre-filter (pre-installed on unit) 1 piece
Your portable air conditioner is supplied with a Leakage-Current Detection and Inter-
ruption (LCDI) plug. This plug reduces the risk of fire due to arcing faults in the power
supply cord. Please follow the instructions below to ensure that LCDI plug works
properly.
1. Plug the power cord to a grounded wall outlet. Do not plug to a power strip or ex-
tension cord.
2. Press the TEST button on the plug. This should trip the plug and cut the power to
the air conditioner. If the plug does not trip and the unit comes on, please contact
technical support.
3. Press the RESET button to start the air conditioner.
4. Do NOT use the TEST and RESET buttons to turn the air conditioner on and off.
Leakage-Current Detection and Interruption (LCDI)