Full Product Manual

DECLARATION OF CONFORMITY
We hereby declare that this air condioner is in compliance with the essenal requirements and other relevant provisions of
Direcve 1999/5/EC.
SPECIFICATION OF WIRELESS MODULE
Model: OSK102
Standard: IEEE 802.11 b/g/n
Antenna Type: External omnidireconal Antenna
Frequency: 2.4 GHz (wireless)
Maximum Transmied Power: 15 dBm Max
Dimensions: 41 x 24 x 5 (mm)
Operaon Temperature: 0°C ~ 45°C / 32°F ~ 113°F.
Operaon Humidity: 10% ~ 85%
Power Input: DC 5V/300 mA
PRECAUTION
1. Supports operang systems: iOS 7+ or Android 4+.
2. In the event of a OS update, there may be a delay between the update of the OS and a related soware update during which
your OS may or may not be supported unl a new version is released. Your specic mobile phone or problems in your network
may prevent the system from working and Whynter will not be responsible for any problems that could be caused by
incompability or network issues.
3. This air condioner only supports WPA-PSK/WPA2-PSK (recommended) encrypon.
4. To ensure proper scanning of the QR code, your smart phone must have at least a 5-megapixel camera.
5. Due to unstable network connecvity, requests may me out. If this happens, re-run the network conguraon.
6. Due to unstable network connecvity, commands may me out. If this happens, the smartphone app and the actual product
may display conicng informaon. The informaon displayed on the actual product is always the most accurate available.
Refresh the app to re-sync.
NOTE: Whynter will not be responsible for any problems that could be caused by incompability or network issues, your wireless
router and mobile phone.
SYSTEM OVERVIEW
Required devices for WIFI Operaon:
1. Smartphone with compable iOS or Android system
2. Wireless Router
3. Portable Air Condioner / Mini Split System