Instructions/Assembly Guide

ACCESSORIES

ACCESSORY IMAGE ACCESSORY DESCRIPTION

QUANTITY

1. Exhaust hose

2. Connector (to the window kit)

3. Connector (to the unit)

3 pieces

Cover

1 piece

Window slider kit with (2) screws and (2) nuts

1 set

1 3

1 piece

Remote Control

WINDOW KIT INSTALLATION

1. Slide the hose assembly with the exhaust connector to unit into the exhaust port of the rear panel and push the lock switch

to lock the hose assembly firmly in place.

2. Insert window panels B and C to each end of the main panel A with the exhaust port cut out. Adjust the length of the window

panel kit by using the screws and nuts mounted on the two ends of the main panel A.

3. Open the window and place the window panel kit into the window. Adjust the extension panels B and C to fit width or height

of window using the screw and nut sets mounted on the main panel A.