Manual
15
REMOTE CONTROL
The portable air conditioner can be switched on by the remote control. To transmit signals from the remote con-
trol to the air conditioner, point the front part of the remote handset towards the control panel on the air condi-
tioner. Reception of the signal is confirmed by a beep. The maximum signal transmission distance is approxi-
mately 8 meters / 26 feet.
NOTE:
Other appliances in the same room controlled by a remote control (TV, radio, stereo, etc.), may cause
interferences
Electronic and fluorescent lamps may interfere with the signal transmissions between the remote control
and the air conditioner
Remove the batteries if the remote control is not used for long periods
INSTALLING BATTERIES
To insert the batteries, open the flap on the back of the remote control by
sliding if off. Strictly adhere to the polarity signs on the bottom of the battery
housing, close the flap once the batteries have been inserted.
Only use two dry LR03 AAA 1.5V Batteries (included) in the remote
control
Always change both batteries at the same time
INDICATOR FUNCTION
1 – Mode Indicator
Displays the current selected mode
(Auto, Cool, Dry, or Fan)
2 – Transmission Indi-
cator
Displays when remote sends signal to
unit
3 – ON/OFF Display
Displays when the unit is turned on, and
disappears when it is turned off
4 – Timer On Indicator Displays when TIMER ON is set
5 – Timer Off Indicator Displays when TIMER OFF is set
6 – Battery Indicator Displays battery life status
7 – Temperature/Timer
display
Displays the set temperature by default,
or timer setting when using TIMER ON/
OFF functions
8 – Sleep Display
Displays when SLEEP function is activat-
ed
9 – Display Window Displays all active settings
10 – Fan Speed Dis-
play
Displays selected Fan speed. This dis-
play is blank when set to AUTO speed.
BUTTONS FUNCTION
11 – On/Off Button Turns the unit On and Off
12 – Mode Button
Controls the 4 function modes:
Auto, Cool, Dry, & Fan
13 – Fan Speed Button
Controls the fan speeds: High, Low
14 – Sleep Button Enables Sleep mode
15 – LED Display But-
ton
Turns on and off the display light
16 – Up Button Increases set temperature/time
17 – Down Button Decreases set temperature/time
18 – Shortcut Button
Restore the current settings or resume
previous settings
19 – Timer On Button Enables the Timer On
20 – Timer Off Button Enables the Timer Off
5
6
4 3 2
1
7
8
9
10
11
12
13
14 15
16
17
18
19
20
21