Whynter EcoPure HEPA System Air Purifier Model # : AFR-425-PW/SW INSTRUCTION MANUAL Congratulations on your new Whynter product. To ensure proper operation, please read this Instruction Manual carefully before using this product. Keep this manual in a safe place for future reference.
DISPOSAL INFORMATION Thank you for choosing the Whynter EcoPure HEPA System Air Purifier. Please follow the instructions provided in this user guide to obtain the very best performance from your air purifier. We trust that your Whynter EcoPure HEPA System Air Purifier will provide the performance and reliability that we stand for. Your Whynter EcoPure HEPA System Air Purifier is the best way to improve the air quality for your general space such as a room, office and even a garage.
TABLE OF CONTENTS PAGE DISPOSAL INFORMATION 2 SAFETY PRECAUTIONS 4 INTRODUCTION / TECHNICAL DATA 5 PARTS IDENTIFICATION 6-7 CONTROL PANEL 8 FILTRATION PROCESS / INSTALLATION 9 INSTALLATION / INITIAL SETUP 10 CLEANING / MAINTENANCE 11 TROUBLESHOOTING 12 WARRANTY INFORMATION 13 3
SAFETY PRECAUTIONS WARNING TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY WHEN USING YOUR AIR PURIFIER, FOLLOW THESE BASIC PRECAUTIONS: Read all instructions before using the appliance. Never clean appliance parts with flammable fluids. The fumes can create a fire hazard. Do not use an excessively wet cloth, industrial solvents, and oil-based products to clean this appliance.
INTRODUCTION / TECHNICAL DATA HOW IT WORKS The Whynter AFR-425-PW/SW air purifier utilizes a complete 5-layer purification system which includes a Pre-Filter, 2-in-1 Activated Carbon Filter and HEPA filter, Photocatalyst filter and UV Bulb. This air purifier not only traps dust and dirt, it also destroys allergens such as dust mites, pollen and pet epithelia. It kills over 99% of viruses, over 98% of bacteria and over 94% of mold and fungus.
PARTS IDENTIFICATION FRONT VIEW Control Panel Remote Sensor Air Quality Sensor Air Inlet Front Cover BACK VIEW REMOTE CONTROL Handle Air Outlet Vent Power Cord 6
PARTS IDENTIFICATION FILTERS ** Activated Carbon Filter and HEPA Filter comes in a 2-in-1 Filter Pack UV Bulb Photocatalyst Filter 2-in-1 Activated Carbon & HEPA Filter Pre-Filter Front Cover 7
CONTROL PANEL Power icon UV Bulb icon Touch to turn the air purifier on and off Touch to turn UV Bulb on and off • Ultraviolet light possesses just the right amount of energy to break organic molecular bonds. As micro-organisms pass by the UV rays radiated from the ultraviolet bulb, this bond breakage translates into cellular or genetic damage for micro-organisms, such as germs, viruses, bacteria, fungi (like molds), etc. This results in the destruction of the micro-organisms.
FILTRATION PROCESS / INSTALLATION 1st Stage - Pre-Filter The washable pre-filter removes large particles such as dust, pet hair and dander, fungus and mold. 2nd Stage - HEPA Filter High Efficiency Particulate Arresting (HEPA) filters are designed to remove 99.97% of all air pollutants that are as small as 0.3 micrometers such as pollen, allergens and dust mites. For reference, 1 micrometer is 1/100th the width of a human hair.
INSTALLATION / INITIAL SETUP The Whynter EcoPure HEPA System Air Purifier is designed for residential use only. To maintain the quality of the filters, they are packaged in plastic. Remove all packaging material from the installed filters before turning on the power. Please make sure that the air purifier is switched off. 1. Remove the front panel by lifting from the bottom and pulling up. 2. Pull out the 2-in-1 Activated Carbon and HEPA Filter and Photocatalyst Filter. 3.
CLEANING AND MAINTENANCE To maintain the performance of the air purifier, cleaning unit regularly and replacing the filter when needed is highly recommended. CLEANING THE AIR QUALITY SENSOR The Air Quality Sensor can be located on the right side of the unit. For best performance, clean the sensor each time you replace the 2-in-1 Activated Carbon and HEPA Filter. 1. To clean the sensor, make sure that the air purifier is switched off. 2. Use a damp cotton swab and wipe the sensor, as shown. 3.
TROUBLESHOOTING Many common air purifier problems are easily resolved. Try the troubleshooting suggestions below to see if the problems can be resolved before having to contact the service department.
ONE YEAR LIMITED WARRANTY This Whynter Air Purifier is warranted, to the original owner within the 48 continental states, for one year from the date of purchase against defects in material and workmanship under normal use and service.
