Installation Guide

MNPV12 & 16 Combiner Instructions (continued)
5 |
P a g e 1 0 - 0 27- 1
R E V : B
The following dimensioned drawings show the enclosure size and location of knockouts available on the
MNPV12&16. Lightning arrestors may require a locknut on the outside in order to clear the lid.
Two 7/8” knockouts (1/2” conduit openings) are located on the sides of the MNPV12. These are primarily
intended for lightning arrestors. One 1 ¼” conduit knockout is located on the back mounting surface.
MNPV12 bottom dimensions
MNPV12 side and front dimensions
MNPV16 side and front dimensions