Manual

3 Product Overview
SMA Solar Technology AG
User Manual SBxx-US-1XP-41-BA-en-10 21
LED signal Explanation
The green LED is pulsing Feed-in operation
The inverter is equipped with a dynamic power display via the green
LED. Depending on the power, the green LED pulses fast or slow. If
necessary, you can switch off the dynamic power display via the
green LED.
The green LED is off The inverter is not feeding into the utility grid.
The red LED is glowing Event occurred
In addition to the glowing red LED, the display indicates the follow-
ing information about the event:
• Event type
• Event number
• Date and time at which the event occurred
The blue LED flashes slowly
for approx. one minute
Communication connection is being established
The inverter is establishing a connection to a local network or is es-
tablishing a direct connection to an end device via Ethernet (e.g.
computer, tablet PC or smartphone).
The blue LED flashes quickly
for approx. two minutes
(0.25s on and 0.25s off).
WPS active
The WPS function is active.
The blue LED is glowing Communication active
There is an active connection with a local network or there is a di-
rect connection with an end device via Ethernet (e.g. computer,
tablet PC or smartphone).
3.5 Display messages
Display message Explanation
Package Installed firmware version and configured country data set
Ser Product serial number
HW Hardware version of the product
FW-HP Firmware version of the central processing unit
FW-KP Firmware version of the communication processor
Ethcom A Status of the network port A
Ethcom B Status of the network port B
E-IP Ethernet IP address of the product
SMsk Subnet mask of the product
GW Gateway address of the product