Manual

4 Operation
SMA Solar Technology AG
User Manual SBxx-US-1XP-41-BA-en-10 31
Posi-
tion
Designation Description
D Status bar Displays the following information:
• Inverter serial number
• Inverter firmware version
• IP address of the inverter within the local network and/or IP address
of the inverter during WLAN connection
• With WLAN connection: Signal strength of WLAN connection
• User group logged in
• Date and device time of the inverter
E Current
power and
current con-
sumption
Temporal progression of the PV power and the power consumption of the
household over the selected time period. Please note, the power con-
sumption will only be displayed if an energy meter is installed in the PV
system.
F Status dis-
play
The various areas display information on the current status of the PV sys-
tem.
• Device status
Displays whether the inverter is currently in a fault-free operating
state or whether there is an Error or Warning present.
• Current power
Displays the power currently being generated by the inverter.
• Current consumption
Displays the current consumption of the household if an energy
meter is installed in the PV system.
• Yield
Displays the energy yield of the inverter.
• Consumption
Displays the energy consumption of the household if an energy
meter is installed in the PV system.
• Feed-in management
Displays whether the inverter is currently limiting its active power.
• Irradiation / wind speed
Depending on the connected sensors, displays the current solar
irradiation and/or wind speed.
• Temperature measurement
Depending on the connected sensors, displays the current
temperature of the PV modules and/or the ambient temperature.
4.5 Displaying and Downloading the Stored Data
If an external storage device is plugged in, you can display and download the stored data.