Installation Guide

81 TriStar MPPT-600V-TR Operator's Manual
80
Technical Specications
Battery Charging Status LEDs
LED Indication
Battery Charging Status
Green Flashing (fast) - 2 to 3 times per second Equalize charging stage
Green Flashing - 1/2 sec on, 1/2 sec off Absorption charging stage
Green Flashing (slow) - 1 sec on, 1 sec off Float charging stage
Green 53.2 Volts ≤ Vbattery
Green & Yellow 52.0 Volts ≤ Vbattery < 53.2 Volts
Yellow 50.8 Volts ≤ Vbattery < 52.0 Volts
Yellow & Red 48.0 Volts ≤ Vbattery < 50.8 Volts
Red Vbattery < 48.0 Volts
Mechanical
TS-MPPT-60-600V-48-DB-TR TS-MPPT-60-600V-48-DB-TR-GFPD
Dimensions: HWD (in.) 21.4 x 8.7 x 5.9 35.6 x 8.7 x 5.9
HWD (cm) 54.4 x 22.1 x 15.0 90.4 x 22.1 x 15.0
Product Weight (lb / kg) 28.11 / 12.75 37.0 / 16.79
Wires Sizes (all wire is assumed to be stranded unless noted otherwise)
Power Board Terminal Lugs: #14 AWG / 2.5 mm
2
to 2 AWG / 33.6 mm
2
Terminal Blocks
Solar: #14 AWG / 2.5 mm
2
to 4 AWG / 21.1 mm
2
Battery: #14 AWG / 2.5 mm
2
to 1/0 AWG / 53.46 mm
2
Grounding: #14 AWG / 2.5 mm
2
to 4 AWG / 21.1 mm
2
Grid-tie Transfer Terminal Block
Solar Input and Grid-tie Output: #12 AWG / 3.3 mm
2
to 4 AWG / 21.1 mm
2
RTS and Battery Sense Terminals: #24 AWG / 0.25 mm
2
16 AWG / 1.0 mm
2
Recommended Torques
5/16 in. Power Board Screws: #10-14 AWG - 35 in-lb / 3.95 N-m
(use 45 in-lb / 5.08 N-m for #10 solid wire)
#8 AWG - 40 in-lb / 4.52 N-m
#4-6 AWG - 45 in-lb / 5.08 N-m
#2-3 AWG - 50 in-lb / 5.65 N-m
#10 Battery Terminal Block Screws: #10-14 AWG - 20 in-lb / 2.26 N-m
#8 AWG - 25 in-lb / 2.83 N-m
#6 AWG - 35 in-lb / 3.95 N-m
5/16 in. Battery Terminal Block Screws: #10-14 AWG - 35 in-lb / 3.95 N-m
(use 45 in-lb / 5.08 N-m for #10 solid wire)
#8 AWG - 40 in-lb / 4.52 N-m
#4-6 AWG - 45 in-lb / 5.08 N-m
#1/0-3 AWG - 50 in-lb / 5.65 N-m
1/4 in. PV and Grounding Block Screws: #10-14 AWG - 35 in-lb / 3.95 N-m
(use 45 in-lb / 5.08 N-m for #10 solid wire)
#8 AWG - 40 in-lb / 4.52 N-m
#4-6 AWG - 45 in-lb / 5.08 N-m
Grid-tie Transfer Terminal Block
Solar Input and Grid-tie Output Screws: 10.6 in-lb / 1.2 N-m
RTS and Battery Sense Terminal Screws: 3.5 in-lb / 0.40 N-m
Knock-outs (trade sizes) M20 & 1/2", 3/4”, 1”, 1-1/4”
Mounting Vertical Surface
Environmental
Operating Altitude Below 2000 meters
Ambient Temperature Range -40 °C to +45 °C
Storage Temperature -55 °C to +85 °C
Humidity 100% N.C.
Enclosure IP20, Type 1 (indoor & vented)
Protections
Solar High Voltage Disconnect
Solar High Voltage Reconnect
Battery High Voltage Disconnect
Battery High Voltage Reconnect
High Temperature Disconnect
High Temperature Reconnect