Product Specifications
Emergency Shutdown Switches
The Emergency Shutdown Switches for both the FRS-01 and the FRS-02 are supplied with a 24VDC power supply suitable for up
to 40 panel operation. They are available with either a “twist-to-release”pushbutton or keylock pushbutton, both with LED indicator
to signal FireRaptor supply status (ON indicates the 24VDC supply is live).
For larger installations, the Emergency Shutdown Switch is available in custom format with:
Contact IMO for further information on any of these options.
Keeping Solar Safe www.imopc.com
Larger power supply options for
increased number of panels (FRS-01 & FRS-02)
Multi connection terminals for
increased number of strings (FRS-01 & FRS-02)
Temperature monitoring unit with hardwire or
mobile communication alarm signalling (FRS-02)
Technical Specification
Emergency Shutdown Cable 2x1mm
2
cable + Tyco SuperSeal 2-pole plug/connector (male/female)
DC Power Supply* 24VDC suitable for up to 20 FireRaptor units (40 panels)
Maximum System Input Power 700W (350W per panel)
Maximum System Input Voltage 150V (75V per panel)
Maximum System Input Current 12A
Maximum Isolation Voltage 1500V
Input Protection Over voltage & transient voltage supression
Maximum System Output Current 12A (99.5% efciency)
Breakdown Voltage 1500VAC for 1 minute
Maximum System Output Voltage 150V (75V per panel)
Output Protection Over voltage, over current & transient voltage suppression
Max. Input Short Circuit Current 15A
Operating Temperature -30°C to +95°C
Ambient Operating Temperature -30°C to +55°C
IP Class Protection >IP68 (designed to comply with NEMA 4X)
PV Casing Flame retardant ABS - UL94-V0
Weight (without cables) 400g
Panel Cable Length 120mm
String & Signal Cable Length 1800mm
Standard Compliance EN 61000, EN 61646, EN 61215, IEC 62716 draft C (NH
3
resistant),
VDE-AR-E 2100-712, BS 7671-712, UL 1741
PV Connectors Multi contact MC4