Manualshelf

Installation Guide

ManualsBrandsWholesale Solar ManualsGrid Tie6.2 kW Grid Tied Solar System with SolarEdge inverter and 20 Mission Solar 310w Panels
10111213141516171819
PAGE 13 OF 18
MISSION SOLAR ENERGY LLC
ELECTRONIC versions are uncontrolled except when accessed directly from document control directory. Printed copies are uncontrolled unless verified against online document.
COPYRIGHT 2019 MISSION SOLAR ENERGY LLC, ALL RIGHTS RESERVED
REVISION:[ R10] 6/12/2019
RELEASE DATE: 11/16/2016
10.1 MOUNTING CLAMPS
Use the mounting holes as a reference - 297 mm (MSE PERC 60) or 370 mm (for MSE PERC 72) for mounting clamp
location. Make sure that the module is evenly between the two rails and sits perpendicular on the railing. If the
module is not perpendicular, slightly adjust the end-clamp positions to get the proper alignment.
MSE PERC 72 / MONO 72
MSE PERC 60
Front View Side Back View
Front View Side Back View