Installation Guide

Page 3 of 11
EXD 8.5-001 PV Module User Manual_REV.02 Effective Date: July 8
th
, 2019
3. Module Specification
Electrical Values
The rated electrical values at Standard Test Conditions (STC) of Heliene Modules can be found in the table
below. The Electrical characteristics are within +/- 10% of the indicated values of I
SC
, V
OC
, and P
MAX
under STC
(irradiance of 1000W/m2, AM 1.5 spectrum, and a cell temperature of 25°C (77°F)).
36M 36P
60M 60P
72M 72P
96M 96P
Peak Rated Power Pmpp(W) 185
180 175 170
Maximum Power Voltage Vmpp(V) 20.2
19.62 19.2 18.93
Maximum Power Current Impp(A) 9.43
9.3 9.22 9.11
Open Circuit Voltage Voc(V) 23.87
23.79 23.4 23.29
Short Circuit Current Isc (A) 9.77
9.74 9.63 9.5
Module Efficiency Eff (% ) 18.50
18 17.5 17
Maximum Fuse Rating MF (A) 20 20 20 20
Power Output Tolerance
[-0, + 4.99] Wp