Product Specifications

Inverter Compatibility
The FireRaptor operates in the same way as an isolator/disconnect switch but is
located at solar panel level. Like an isolator/disconnect, the FireRaptor is
compatible with all string inverters and does not affect their operation or
performance in any way.
FireRaptor Installation
The FireRaptor is easy to install, requires no set-up and is suitable for both new
and retro-t installations. It is designed to shutdown two panels or it can be
mounted in single panel conguration if preferred. The diagram below shows a
typical two-panel installation.
The FireRaptor is manufactured using original MC4 connectors on the DC cables
ensuring high quality integration and compatibility. The Emergency Switch control
cable is tted with Tyco SuperSeal connectors ensuring quick and easy (plug &
play) installation.
Keeping Solar Safe www.imopc.com
String Inverter
=
Mobile Communication
Notification
Connection to Building Alarm
System or BMS
Part Number Description
FRS-01 FireRaptor Rapid Shutdown Unit - suitable for connection to two solar panels
FRS-02 FireRaptor Monitored Rapid Shutdown Unit - suitable for connection to two solar panels
FRS-ESW1 Emergency Rapid Shutdown Switch IP66 (for FRS-01) - includes 24VDC power supply
FRS-ESW1-K Emergency Rapid Shutdown Switch IP66 (for FRS-01) with Key Lock - includes 24VDC power supply
FRS-ESW2 Emergency Rapid Shutdown Switch IP66 (for FRS-02) - includes 24VDC power supply
FRS-ESW2-K Emergency Rapid Shutdown Switch IP66 (for FRS-02) with Key Lock - includes 24VDC power supply
FRS-SIGCAB1.8-F 1.8m (70”) Signal Cable terminated at one end with Tyco female connector for use at end of PV String
Ordering Information
Note: If two panel installation is used in accordance with NEC 2017, each panel must be <40V.
Only available with FRS-02 version