Installation Guide
9TriStar Meter 2 Operator’s Manual
Installation
3.0
The TriStar meters can be added to the controller when it is
rstinstalled,oratanytimeafterthecontrollerhasbeenin
service.
3.1 General Information
!
CAUTION: Risk of Shock
Disconnect all power to the TriStar prior to installa-
tion. The meter will not be damaged if connected with
power, but for safety, power should be disconnected
before the access cover is removed.
!
CAUTION: Equipment Damage
Do not allow the local meter to hang or dangle from
the RJ-11 cable when connected to the TriStar. The
resulting stress on the cable could damage the meter
or connectors.
Installation steps will differ depending on the number of TriStar
controllers in the system.
For Single TriStar Systems:
• Mount a local meter (TS-M-2 or TS-M-2-600V) to a TriStar,
or mount a TS-RM-2 in a remote location.
• Connect the meter cable to the RJ-11 connectors
• Adjust the meter settings