Installation Guide

43TriStar Meter 2 Operator’s Manual
The meter map provided does not match the meter
display:
• the meter map may not match the meter display due to software
revisions, the latest maps are available for download on our
website
• if there are substantial differences between the map and the
display, either the wrong map is used or the controller is not
conguredforthecorrectoperatingmode
The meter does not respond to button pushes:
• press the push-button down harder - it will not break
• tryotherpush-buttonstoconrmoneormoreareworking
• if others work, the faulty button may have dirt on the contact
• to clean:
 disconnect the power
 remove the 2 Phillips screws that fasten the meter to the
cover plate
 remove the meter assembly from the yellow button pad
 clean the push-button contacts and circuit board contacts
with alcohol and a cotton swab.
 reassemble the meter
Dirt is trapped between the display and the label window:
• to clean:
 disconnect the power
 remove the (2) Phillips screws that fasten the meter to the
cover plate
 remove the meter assembly from the yellow button pad
 clean the label window and screen with a damp cloth
and dry.
 re-assemble the meter