Installation Guide

36 Operation
The setting values displayed in the Advanced Set-Up menu
screens vary depending on the TriStar controller model and
mode of operation (charge, load, diversion, etc). Refer to the
meter map of the particular model purchased for detailed dis-
play information. If a meter and TriStar PWM controller have
beenupdatedwithcurrentrmware,MeterBusaddressescan
be assigned via the meter. Address programming can also
be done through Morningstar’s MSView PC software. TriStar
MPPTcontrollerscanbemodiedusingMSView,ordirectly
from the TriStar Meter 2 Advanced Set-Up menu.
For each value in the menu, use the left and right push-buttons
to modify the setting. The setting will be saved when the up
or down push-button is pressed. Some settings may fault the
controllerwhenmodied.Thecontrollerwillneedtobereset
by removing and then re-connecting power.