Installation Guide

27TriStar Meter 2 Operator’s Manual
Manual Operations
Screens located below the Operating Displays provide for
various resets and manual functions. Additional display
screens for resets and manual functions can be found in
the Diagnostics menu. Figure 4-3 shows the location of the
Manual Operation displays in the menu.
Diagnositics
(Press  )
TriStar Settings
(Press  )
(Press  )
Logged Data
(Press  )
Advanced Setup
Operating
Display
Operating
Display
Operating
Display
Reset Ah
Equalize START
(Hold  2 sec)
(Hold  2 sec)
}
Manual
Operations
Figure 4-3. Manual Operation Displays
Below is a full list of possible Manual Operation screens that
can be displayed. Only operations that are relevant to the
TriStar model and mode are displayed on the meter.
Reset Amp-hours
This display screen can be used to reset the resettable Ah
value. Additionally, this operation will reset the resettable kWh
counter and the battery minimum / maximum values displayed
in the Operating Displays. Hold the right arrow push-button for
two seconds and all three values will be reset to zero.