Installation Guide

21TriStar Meter 2 Operator’s Manual
Example Network #2
TriStar 600V
with
TS-M-2-600V
TS-RM-2
TriStar
Relay
Driver
TriStar
1
2
3
Figure 3-4. A medium-sized network with 3 TriStars, 2 meters, and a
Relay Driver.
• TriStar 1 provides power to the hub and Remote Meter.
• TriStar 2 powers the Relay Driver and TriStar 3 powers the Local
Meter. It is good practice to distribute the network meters and
Relay Driver as shown to avoid loading a single TriStar with all of
the network accessories.
• All three TriStars are isolated from each other in this system.
NOTE:
Information is shared across the entire MeterBus
network. A meter can be connected anywhere in the
system and will always show full aggregate system
information as well as information about each con-
troller on the network. This is true regardless of the
meter model (TS-M-2, TS-RM-2 or TS-M-2-600V).