Installation Guide

Page 2 of 10
EXD 8.5-001 PV Module User Manual_REV.02 Effective Date: July 8
th
, 2019
1. Introduction for this User Manual
This Manual contains information regarding the installation, maintenance and use of the series solar modules
manufactured by Heliene Inc. All instructions should be read and understood before attempting installation.
Failure to follow these safety instructions could result in personal injury or property damage.
Installation and operation of solar modules require specialized skills, and only professional personnel can engage
in the work. The term “Module” Or “PV module” in this Manual refers to one or more series solar modules.
Please keep this Manual in a safe place for future reference.
2. General
Heliene Solar Modules includes the latest technology of mono-crystalline and multi-crystalline solar cells
designed and manufactured by industry leading suppliers. The absorption surface and innovative design provide
a world class power output and an unmatched aesthetic presence.
o Ordinary Location Modules comes with a
permanently attached junction box and #12
AWG (4 mm
2
) wire terminated in PV Multi-
Contact (MC4 type) connectors.
o Hazardous Location Modules (Class I Division
2) comes with a permanently attached
junction box that requires field assembly
according to local code since cables, glands
or connectors are not included. Exercise
caution when wiring or handling modules
exposed to sunlight.
o Photovoltaic solar modules convert light
energy to direct-current electrical energy,
and are designed for outdoor use. Proper
design of support structures is the
responsibility of the system designer and installer.
2.1 Applicable Products
This document is applicable to the series of solar modules as listed below:
36 Cell Mono (Max. Power Range: 165 – 185W)
36 Cell Poly (Max. Power Range: 145 – 160W)
60 Cell Mono (Max. Power Range: 285 – 305W)
60 Cell Poly (Max. Power Range: 250 – 270W)
72 Cell Mono (Max. Power Range: 340 – 370W)
72 Cell Poly (Max. Power Range: 310 – 340W)
96 Cell Mono (Max. Power Range: 460 – 490W)
96 Cell Poly (Max. Power Range: 415 – 430W)
Make sure the installation of modules is within the maximum permitted system voltage and rating current.