Warranty

the “warranty start date”, the modules will still produce
a power output of at least 83.0% based on the stated
nominal output at STC.
Astronergy Warranted Power Output
For the above such loss in power measured by Chint
Solar facility or the 3rd party testing institute recognized
by both sides, it is determined by Chint Solar (at its sole
and absolute discretion) to be due to defects in material
or workmanship, is eligible for claim under this Limited
Warranty for Crystalline PV Modules. Chint Solar will
remedy such loss in power by either providing additional
modules to the customer to make up for such loss in
power, or by repairing or replacing the defective modules
at the discretion of Chint Solar.
The remedies set forth in this Clause 2 shall be the sole
and exclusive remedies provided under the “Limited Peak
Power Warranty – Limited Remedy”.
Caution: Any power measurement mentioned herein
shall be carried out in accordance with IEC 60904 and
subjected to - a power measurement uncertainty of ±3%.
2
peak power as specified on the respective datasheet at
STC from the 2nd year to 25th year. Consequently, at the
end of the twenty-fth year from the “warranty start date”,
the modules will still produce a power output of at least
80.7% based on the stated nominal output at STC.
2). Regular mono product exhibits a power output no
less than 97% of the nominal peak power specified on
the respective datasheet or module label at Standard
Testing Conditions (STC, defined as: (a) light spectrum
of AM 1.5, (b) an irradiation of 1000 W per m2 and (c)
a cell temperature of 25 degrees Celsius at right angle
irradiation.) within the rst year from the date of delivery
to the end customers but not later than 6 months after
delivery to the rst purchaser from Chint Solar, (hereafter
referred to as the “warranty start date”), or power output
declining by no more than 0.7% per year of the nominal
peak power as specified on the respective datasheet at
STC from the 2nd year to 25th year. Consequently, at the
end of the twenty-fth year from the “warranty start date”,
the modules will still produce a power output of at least
80.2% based on the stated nominal output at STC.
3). Diamond series and Double glass product exhibits a
power output no less than 97.5% of the nominal peak
power specified on the respective datasheet or module
label at Standard Testing Conditions (STC, defined as:
(a) light spectrum of AM 1.5, (b) an irradiation of 1000 W
per m2 and (c) a cell temperature of 25 degrees Celsius
at right angle irradiation.) within the first year from
the date of delivery to the end customers but not later
than 6 months after delivery to the first purchaser from
Chint Solar, (hereafter referred to as the “warranty start
date”), or power output declining by no more than 0.5%
per year of the nominal peak power as specified on the
respective datasheet at STC from the 2nd year to 30th
year. Consequently, at the end of the thirtieth year from
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Diamond series & Double glass Product Linear Performance Warranty
Regular Poly Product Linear Performance Warranty
Regular Mono Product Linear Performance Warranty
100.00%
95.00%
90.00%
85.00%
80.00%
75.00%
97.50%
97.00%
80.70%
83.00%
80.20%