Operating Instructions

The WHITOP toothbrush meets the safety standard of electromagnetic
device. For any questions about pacemakers or other implanted devices,
please consult your doctor or the device manufacturer of the implanted
device before use.
★Precautions
Do not wrap the power cord around the charger when charging.
- Otherwise, it may cause the power cord to be disconnected and may cause
electric shock or fire caused by short circuit.
Please disconnect the product from the power supply in addition to the
time when the product is charged.
- Otherwise, it may lead to leakage due to the decline of insulation performance,
which may lead to electric shock or fire.
Hold the adapter plug instead of just the power cord when pulling out the
adapter.
- Otherwise, it may cause electric shock or fire due to short circuit.
★Instructions for use
Do not use paint thinner, gasoline, alcohol or other chemicals to clean the product.
Otherwise, it may cause the product to crack or fade. Use a soft cloth slightly dipped in
tap water or soapy water to clean the cover.
After use, the product should be placed far away from the pool, bathroom or other
areas exposed to water or moisture, and avoid being placed under high temperature
or direct sunlight.
Product Introduction
1
Toothbrush
shaft protective
cover
2
Toothbrush
head
3
Unit
4
On / off switch
5
Hidden brush mode
indicator
6
Breathing charging
indicator
7
Brush head cover
8
Charging stand / USB
cable
Note: the items in the box may vary according
to the model purchased.
Charging
When brushing teeth normally, the
red light of the charging indicator
flashes, indicating that the power of
the product is low and reminding
that it needs to be charged;
Wireless charging model (with
charging stand): connect the adapter,
plug in the external socket, or USB
interface directly connect to the
portable mobile power supply, and
put the front of the unit straight
forward on the charging stand;
TYPE-C direct-charging model
(with USB cable): plug in the USB
cable, connect the adapter, plug in the
external socket, or connect the USB
interface directly to the portable
mobile power supply;
Please refer to the attached table for
the charging time of specific models.
In the process of charging, the
power indicator changes from
flashing in red to green light,
indicating that the battery is full.
Wireless charging TYPE-C direct-charging