Instructions / Assembly

ManualsBrandsWhitmor ManualsCube Storage35 in. H x 12 in. W x 11 in. D Espresso 3- Cube Organizer

6422-8855-ESPR-BB 3-Cube Organizer - Espresso

SAFETY PRECAUTIONS:

Step 1: Insert dowels (J) into the inside predrilled holes in the

horizontal panel (2). Insert into the corresponding holes in the

side frame (1) and attach with two hex screws (A). Tighten with

hex wrench (L). Repeat for the remaining horizontal panels.

Install eight screw covers (D).

Step 2: Insert horizontal panel dowels into the corresponding

holes in the side frame (1) and attach with two hex screws (A).

Tighten with hex wrench (L). Repeat for the remaining

horizontal panels. Install eight screw covers (D).

Page 2

WARNING

• This unit contains small parts which could

be a choking hazard for small children.

Children should be under adult supervision at

all times or serious injury could occur.

• Always unload unit prior to moving the

unit. The weight of personal belongings can

cause the unit to become unstable and either

tip or collapse. Serious bodily injury and/or

damage to personal belongings may occur.

• Do not overload unit. If any shelf, top, or

bottom of unit bows or bends, it is overloaded.

The shelf, top, or bottom could collapse and

cause serious bodily injury and/or damage to

personal belongings.

• Do not climb or step on the unit. The unit

may become unstable and either tip or

collapse. Serious bodily injury and/or damage

to personal belongings may occur.

• Do not mount or attach anything to the

sides, rear or front of the unit as this can

create a force which can cause the unit to tip.

Serious bodily injury and/or damage to

personal belongings may occur.

• Do not hang this unit on the wall. The

product structure is not designed for wall

hanging. Serious bodily injury, damage to

personal belongings, and/or damage to the

wall may occur.

• All units must be secured individually to a

wall stud using the included safety strap and

screws. If wall stud is not accessible consult

your local hardware store for appropriate

mounting hardware. Failure to do so may

create an unsafe tipping hazard that could

lead to serious bodily injury and/or damage to

personal belongings.

• Follow proper safety procedures when

using power tools and ladders (when

applicable).

• We recommend you protect your work

surface during assembly to prevent scratching

or damage to table tops, wood floors, etc.