Installation Guide


Dome Premium Genuine Film Installation User Guide
TOP
Film
liner film
TOP
Film
liner film
Installation
STEP5
Hold the top part of the 󽗉lm as shown, and bend the [1 sticker] as shown in [Figure 1].
Like [Figure 2] Make sure that the protective 󽗉lm and pet 󽗉lm are properly separated and
slowly remove the protective 󽗉lm. If it is as shown in [Figure 3], attach the protective 󽗉lm as if
it is in the 󽗉rst state and remove it carefully so that only the protective 󽗉lm can be removed.
󾖴󾖴󾖴󾖴󾖴󾖴󾖼
※Correct sticker removal direction※
※Incorrect sticker removal direction※
※In the case of the above,
there is a sound of tearing the tape※
[Figure 1]
[Figure 2]
[Figure3] Film and protective 󽗉lm are separated together.
󾖴󾖴󾖴󾖴󾖴󾖴󾖼
󾖴󾖴󾖴󾖴󽗉󾖴󾖴󾖴󾖴󾖴󾖴󾖼
STEP6
Flip the 󽗉lm with the protective 󽗉lm removed so that the top/bottom text are visible to the front.
1) Insert the top part of the 󽗉lm into the Align block.
2) Insert the bottom part of the 󽗉lm into the bottom part of the JIG.
1
①
②
REMOVE