User's Manual

9 10
Assembly of Handle and Handle Bracket
2
3 4
Tighten the quick-release screws of
the handle bracket
Complete the assembly of
power system and handle bracket
Operation Description
1
Directions for Operation
Switch/speed-level
adjustment button
Switch/ networking toggle button
Networking button
Start button
To start
the power
system
1
Press the power system
switch/networking toggle
button for 3S. The power
system light will be on and
the start is successful.
Items
Operation Method
RemarksPhotos
To start
the control
handle
Press and hold the control
handle switch/speed-level
adjustment button for 3S.
The handle light will be on
and the start is successful.
The start speed is "low
speed" by default.
The initial start speed is
"low speed" by default.
The decorative cover is connected by the buckles and the handle bracket. If you
need to remove the cover, the elasticity of the plastic itself can be used to remove it
with a little force.
The control handle can be installed on the
left or right side according to the needs.
Before each use, check whether the
tightening handle is tight.
Pass the control handle and the grip handle
through the handle bracket mounting holes
and tighten them.