User's Manual

5 6
Check appearance
After unpacking the product, please check carefully whether the inorganic body shell is
broken, the protective cover is fallen, the propeller blade is damaged, the battery back
cover cannot be opened, the battery swells or has liquid leakage, the battery sealing pad
is damaged, and other conditions affect the use of the product.
Unpacking for Inspection
1
Preparation before the First Use
Check function
*For the operation method, please refer to the relevant content in the following instructions.
1. Switch/gear button
3. State indicator
5. Tightening handle
2. Start button
4. Networking button
6. Charging port of handle
Control Handle
Single thruster Handle Bracket
(1) Check whether the power system can be started and networked normally*, start the
thruster after networking, and check whether the propeller is running normally;
(2) Check whether the control handle can be started and networked normally*, press the
start button after networking, check whether the start button is stuck, whether it can
normally control the starting and shutdown of the power system's propeller, and check
whether the speed levels can be switched normally.
2
1
3
22
3
3
4
5
6
Connect the charger to the AC mains supply (100-240VAC, 50/60Hz).
2 Check battery power and charge it
Charging the Battery of Power System
Charging Charging completed
1
If you find any of the problems when unpacking, don't use it, and please contact
Sublue After-sale Service Center or its authorized service center. Do not run the
product for more than 30 seconds without water.
1.
2.
3.
Universal mounting point of
sports camera
Handle mounting hole
Mounting hole for quick-re-
lease screw