User's Manual

21 22
Shake fully and clean the WhiteShark Tini body to remove any foreign objects
attached to it.
Wipe the surface with a clean, soft, dust-free cloth. Make sure that the product body
and battery have no water beads. And place them in a cool and dryplace to dry
naturally.
4
If you are not going to use the product for a long time, please note that the power
system, control handle and the battery should be stored separately, and please follow
the principles below:
Please ensure that the power system is in a cool and ventilated place above 0 ° C
and below 45 °C.
Don't place it in areas with poor ventilation or humidity above 65%RH
Don't place it in areas exposed to direct sunlight.
Keep away from heat, fire source and children's reach.
Keep away from those equipment that may generate strong magnetic fields.
Please take out the product at least once a month and run it for about 10 seconds to
avoid the corrosion caused by changes in storage environment.
The control handle contains lithium battery. For storage method, see the Storage and
Maintenance of the Power System Battery and the Control Handle.
Storage
2
Fault Solution
Motor fails to start
General Troubleshooting Method
Check whether the power system battery and control
handle carry electricity.
Check whether the power system and control handle
can be turned on normally, and the indicator is on
normally.
Check whether the power system and control handle
can be networked normally, and the speed can be
adjusted.
Check if the propeller can be rotated.
Contact Sublue or Sublue authorized service
organization.
Screw propeller is stuck
or rotating abnormally
Remove the battery.
Check if the propeller can be rotated.
Check if the propeller is wrapped by foreign object.
Perform the requirements of “Clean after use” section
in “Maintenance” .
Contact Sublue or Sublue authorized service
organization.
* Never use a hair dryer or drying apparatus.
1
2
3
4
3
4
5
6
7
1
2
3
4
5
1
2
3
4
5