WhiteShark Tini USER MANUAL TM Please read this User Manual carefully before using and store it in a safe place V10 SUBLUE Tianjin (Headquarters) ADD. No.1,Quanzhou Road,Zhongguancun Science and Tech.Park,Binhai Tianjin CHN E-mail support@sublue.com Web www.sublue.com The final right of interpretation belongs to Sublue TM * This product is not intended for use by people under the age of eight. * As with other electronic products, care should be taken to prevent the risk of electric shock during use.
Recommendations and Support 1 Recommendations When using this product for the first time, please read the "WhiteShark Tini User Manual" for product information and instructions. 2 Support You can choose the following ways to get related service and support for frequently asked questions (FAQ), user manual, and teaching videos, etc. Website: http://www.sublue.com Email: support@sublue.com Other regions: China: Service Hotline: 400-806-2688 Email: support@sublue.
Warning Notice Warning 8+ This product cannot be used as a life-saving appliance. To ensure safety, users shall be either wearing life jackets or equipped with life-saving equipment under any circumstances. 1 Please fully charge the batteries of the power system and the control handle. 2 Do not take alcohol or medication before or during using this product. 3 Try to use this product in an open area.
Contents Overview Brief Introduction Product Features List of Items Name of Components Preparation before the First Use Unpacking for Inspection Check Battery Power Capacity and Charge Read the User Manual Start Use Instructions for Assembly Assembly the Power System and Handle Bracket Assembly the Handle and Handle Bracket Operation Instructions Operation Instructions Description of Indicator Lights Use the Product Correctly Proper Grip and Hold Posture Turning in Water Float Up and Drop Down 1 1
Product Overview 1 Product Introduction WhiteShark Tini is a brand new underwater scooter product launched by Sublue for worldwide diving, swimming and water enthusiasts. It has two speeds which can be freely switched, realizing an all-round upgrade of power, performance and experience. WhiteShark Tini adopts Sublue's self-developed high-efficiency power system and wireless control technology, with an innovative modular design.
3 List of Items 4 Components Name Tini Power System Tini power system ×1 Control handle ×1 Control handle ×1 Single-boosting handle bracket ×1 Handle bracket decorative cover ×1 Quick-release screws ×2 Lithium ion battery & charging base ×1 Charging adapter & cable ×1 Magnetic charging cable ×1 Mounting screw ×1 Expository documents ×3 Machine sticker ×1 Before using this product, please check carefully whether the product package includes the above items.
Preparation before the First Use 1 Unpacking for Inspection Control Handle 1. Switch/gear button 3. State indicator 5. Tightening handle 2. Start button 4. Networking button 6.
3 Read the User Manual Before using, please carefully read the user manual and be familiar with the product operation and instructions. 4 Start Use Explore the underwater world with your WhiteShark Tini. Socket Adapter Battery and Charging Base Before using the product, please be familiar with the product performance in an absolutely safe water environment and fullymaster the operations.
3 Directions for Operation 4 1 Operation Description Switch/speed-level adjustment button Tighten the quick-release screws of the handle bracket Networking button Complete the assembly of power system and handle bracket The decorative cover is connected by the buckles and the handle bracket. If you need to remove the cover, the elasticity of the plastic itself can be used to remove it with a little force.
Items Operation Method Power system networking2 In the shutdown state, press the power system switch/networking button for 6S to enter the networking mode. In the power-on state, press Control and hold the handle handle networking2 networking button for 3S to enter the networking mode. When it has been turned on and successfully connected to the network, press the Speed level control handle 4 adjustment switch/speed-level adjustment button to adjust speed. The speed will be adjusted once you press it.
2 Description of indicator lamp The WhiteShark Tini body and the control handle contain LED indicators for alerting state and battery power.
Use the Product Correctly After assembling WhiteShark Tini, you should be familiar with its performance in an safe water environment and fully master the operations before using it. 3 Float up and drop down 1 Proper grip and hold posture Float up Drop down If you have not studied diving or received professional training, don't use the product to float and dive too quickly to avoid harm to your body.
3. When the equipment is powered on, if the indicators indicates a low battery power, it indicates that the battery power is low. Please charge it in time. 4. It will take about 2 hours to fully charge the battery. 3 Battery Replacement When the battery is installed and tightened in the correct way, you will hear a sound of "clatter". Please confirm that the battery is already installed tightly (as shown below). 咔嗒 2 Battery Charging Connect the charger to the AC mains supply (100-240VAC, 50/60Hz).
11 12 13 14 To charge the control handle, an adapter with an output voltage of 5V and an output current of 1A and above is required. 6 Storage and Maintenance of the Power System Battery and the Control Handle 1 2 3 4 5 6 7 8 9 10 19 When the product is not in use, the battery must be taken out and placed separately. The battery or control handle shall be stored at 25±5 ° C, the humidity is 65 ± 20% RH, and the battery power is maintained at 30% - 60%.
6 7 3 Shake fully and clean the WhiteShark Tini body to remove any foreign objects attached to it. 44 Wipe the surface with a clean, soft, dust-free cloth. Make sure that the product body and battery have no water beads. And place them in a cool and dryplace to dry naturally. Please take out the product at least once a month and run it for about 10 seconds to avoid the corrosion caused by changes in storage environment. The control handle contains lithium battery.
Fault LED lamp of power system is abnormal LED lamp of control handle is abnormal Solution Fault 1 Check if the battery has power 2 Check if it can be started normally 3 Contact Sublue or Sublue authorized service Solution Battery charging is abnormal Contact Sublue or Sublue authorized service organization organization 1 Check if the control handle can be started normally 2 Check if the control handle can be charged normally 3 Contact Sublue or Sublue authorized service organization The battery
Service time: Power system: The usual use time2 can reach the highest 45 minutes (Continuous use time3: can reach 20 minutes at high speed, and 35 minutes at low speed) Control handle: The usual use time2 can reach the highest 150 minutes (Continuous use time4 can reach 100 minutes) External loads: support to carry a sports camera, floater, and double-boosting handle bracket Ambient temperature for operating: 0-35° Storage environment temperature: 0-45° Motor stator Fairwater sleeve Motor rotor G
* 1. The speed level is the experimental speed. The speed of navigation will be affected by such factors as different users, water temperature, water depth and flow and other water conditions, as well as the increase of equipment-carrying load, and the user's underwater wearing and equipment. * 2. The normal use time is the average value of the maximum time that the user operate the product in general usage habits (non-continuous operation) when the equipment is fully charged. * 3.
Names and Contents of Harmful Substances in Products Harmful substance Pb Hg Cd Circuit board assembly O O O Plastic (glue) parts O O Metal parts O O Power cord Adapter Charging seat Battery Other accessories O O O O O O O O O O PBB PBDE DIBP DEHP BBP DBP O O O O O O O O O O O O O O O O O O O O O O O O O O O O Cr6（VI） O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O This form is prepared according to SJ/T 11364.
Sublue Technical support http://service.sublue.com Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued operation, follow the attached installation instructions and use only shield cables when connecting to other devices.
