User guide

Enable or disable the At Very Low settings
You can enable or disable the default settings at any time, and you do not have to re-enable them
when you install a new toner cartridge.
1. From the Home screen on the product control panel, touch the Setup
button.
2. Open the following menus:
●
System Setup
●
Supply Settings
●
Black Cartridge
●
Very Low Setting
3. Select one of the following options:
●
Select the Continue option to set the product to alert you that the toner cartridge is very low,
but to continue printing.
●
Select the Stop option to set the product to stop printing (including printing faxes) until you
replace the toner cartridge.
●
Select the Prompt option to set the product to stop printing (including printing faxes) and
prompt you to replace the toner cartridge. You can acknowledge the prompt and continue
printing. A customer configurable option on this product is "Prompt to Remind Me in 100
pages, 200 pages, 300 pages, 400 pages, or never." This option is provided as a customer
convenience and is not an indication these pages will have acceptable print quality.
When the product is set to the Stop option, there is some risk that faxes will not print after the new
cartridge is installed if your product has received more faxes than the memory can hold while stopped.
When the product is set to the Prompt option, there is some risk that faxes will not print after the new
cartridge is installed if your product has received more faxes than the memory can hold while the
product is waiting for the prompt to be acknowledged.
Once an HP toner cartridge has reached Very Low, HP’s Premium Protection Warranty on that toner
cartridge has ended. All print defects or cartridge failures incurred when an HP toner cartridge is used
in Continue at very low mode will not be considered to be defects in materials or workmanship in the
toner cartridge under the HP Toner Cartridge Warranty Statement.
36 Chapter 3 Parts, supplies, and accessories ENWW