Operation Manual

8
1. Screw cover 2. Screw 3.Top cover 5. Upper hinge 6. Pin 7.Upper door 8. Mid-hinge 12. Lower door
13. Lower hinge 14. leg regulator 17. Pin 18. leg regulator (H) 19.Upper hinge cover 20.Top cover deck
piece 22.Limited block 23.Upper hinge cover(L)
1. Remove the screw cover(1), remove the screws(2) and the top cover(3)and upper hinge(5), remove the upper
door(7).
2. Remove the mid-hinge(8) and the lower door(12), remember keep the padded surface of the door upwards to
prevent the scratching.
3. Remove the lower hinge(13),leg regulator(H)(18) that on the left side.
4.Remove the pin(17), and the leg regulator(14) of the lower hinge(13), and then transfer the pin /leg regulator to the
opposite side of the lower hinge.
5. Insert the lower hinge(13) in the left lower side, fix the lower hinge on the cabinet, and fix the leg regulator(H)(18)
in the right lower side.
6. Remove the limited blocks(22) on the bottom-right side of the upper door and lower door , and then fix the limited
blocks(22) on the bottom-left side of door.
7.Remove the pin(20)from the upper hinge, and then transfer it to the opposite side of the upper hinge.
8. Put the lower door on the lower hinge, keep the door level, then fix the mid-hinge, upper door and upper hinge
on the cabinet.
9. Remove the Upper hinge cover (19) from the top cover , and then transfer the top cover deck piece(20) to the
opposite side of the top cover , and fix the upper hinge cover(L) (23)on the left side of the top cover.
10. Fix the top cover and screw cover.