Installation & Assembly

ADDRESS SIGN AND MONOGRAM INSTALLATION:
A) Mailbox body
B) Address Sign - 2 (optional)
©2020 Whitehall Products, LLC Customer Service: 800.728.2164 www.whitehallproducts.com AW-1073
Need Additional Assistance? If you have questions about your mailbox you may call Whitehall Products Customer Service : 800.728.2164
B
C
BALMORAL MAILBOX
D
1)
2)
3)
4)
5)
6)
7)
Lay down a soft clean cloth on a flat surface. Place
Balmoral Mailbox (A) on its side and one (1) Address
Sign (B) face down. With a soft cloth, wipe backside of
the plaque and within the mailbox's side plaque frame to
ensure proper tape adhesion.
Without removing the adhesive backing, place four (4) of
the provided Adhesive Tape Squares (C) within the
corners of the plaque frame (FIG. 1A) approx. 1/4"-1/2"
from each border edge. Be sure to give each square
enough space to avoid overlap or overhang (FIG. 2A).
Once evenly spaced, peel off one (1) plastic backer of
each adhesive tape square one by one and replace
EXACTLY with the sticky side down. TAPE BONDS
IMMEDIATELY. Press firmly for 15 seconds to FULLY
activate adhesive. Repeat for each tape square.
Peel off the remaining plastic backers. Locate one (1)
Address Sign (B) and ensure sign has upright orientation
before installation. The adhesive bonds immediately
and cannot be repositioned. With the Mailbox (A) still
on its side, align the Address Sign (B) within the raised
border. Slowly set the plaque in its place. Press firmly for
15 seconds over each tape location to FULLY activate
adhesive.
Continue with steps 1-4 for remaining Address Sign (B).
For optional Monogram (C), set Mailbox (A) with its door
facing the ceiling (FIG. 1B). With a soft cloth, wipe within
mailbox doors raised circular monogram frame and back
of the Monogram (C) to ensure proper tape adhesion.
Follow steps 2-4 above with one (1) Adhesive Tape
Square and Monogram (C) using FIG. 1B and FIG. 2B.
Enjoy your new personalized Balmoral Mailbox!
A
Place tape within raised boarder 1/4”
Instructions:
FIG.1A
Parts included:
FIG.1B
FIG.2A
FIG.2B
C) Monogram (optional)
D) 2”x 2” Adhesive Tape
Squares

Summary of content (1 pages)