Specifications

White Paper Z200/Z208
48 February 2004
User interaction with SIM AT
Display text
Text of up to 240 characters (120 UCS2 coded) is
supported.
Text clearing times are 10-20 seconds. 60-second
time-out limit for the user to clear the text.
‘Key’ responses:
• ‘Long NO’ – Proactive session terminated by
user.
• ‘NO’ – Backward move in proactive session.
• Any other key clears display if the command is
performed successfully.
Get inkey
Prompt for a one-character input. Pressing ‘YES’
without entering a character gives warning mes-
sage “Minimum 1 character”.
‘Key’ responses:
• ‘CLR’ clears current character.
• ‘Long NO’ terminates the proactive session.
• ‘NO’ – Backward move in proactive session.
• ‘YES’ – Command performed successfully.
Get input
Prompt for character input. Pressing ‘YES’ without
entering a character gives warning message
“Minimum ‘no.’ characters”. The phone will refuse
to accept further input when the maximum
response length is exceeded.
MMI Maximum Response lengths:
• Digits Only – 160 characters
• SMS default alphabet characters – 160 charac-
ters
• Hidden Characters (digits only) – 11 characters
‘Key’ responses:
• ‘CLR’ clears current character/characters.
• ‘Long NO’ terminates the proactive session.
• ‘NO’ – Backward move in proactive session.
• ‘YES’ – Command performed successfully.
Refresh
When a Refresh - SIM Reset command is ececuted
by the phone, it displays the message “Please
wait” and then restarts.
Select item
Scroll to highlight item for selection. The maximum
number of items supported by the phone within
one Select Item command is 30.
‘Key’ responses:
• Down arrow – Scroll down list.
• Up arrow – Scroll up list.
• Long ‘NO’ terminates proactive session.
• ‘NO’ – Backward move in proactive session.
• ‘YES’ – Command performed successfully.
Send short message
Default message “Sending message, please wait”
can be replaced by the Alpha Identifier text, or sup-
pressed completely if a null text is provided.
Responses are “MESSAGE FAILED” or “MESSAGE
SENT”.
‘Key’ responses:
• Long ‘NO’ or ‘NO’ terminates the proactive ses-
sion.
Set up call
If the ME is on a call when the command 'Set up
Call, putting all other calls on hold' is sent, the user
sees the text 'Setting up a call current call will be
held'.
Press the 'YES' key to put current call on hold and
set up new call.
If the ME is on a call when the command ‘Set Up
Call, disconnecting all other calls’ is sent, the user
sees the text ‘Setting up a call current call will be
disconnected’.
Press the ‘YES’ key to disconnect the current call
and set up the new call.
Set up menu
Incorporates a SIM Application Toolkit Menu Item
into the ME’s main menu structure. From the
standby display the right or left arrow buttons can
be pressed to select the Menu Items. (Note: The
SIM AT menu option is found in the ‘Connectivity’
menu.)
If an Alpha Identifier is supplied in the Set Up Menu
command, this is used as the SIM AT entry in the
ME’s main menu. If no alpha identifier is supplied
and only one item provided, then this item is used
as header. If no alpha identifier is supplied and sev-