Specifications

White Paper Z200/Z208
38 February 2004
Cell broadcast service
Support of the QoS modifi-
cation procedure
Yes, when initiated by the network
(not by the handset)
Interfaces to external
devices supported by the
phone
IrDA, Datarate = SIR & MIR, max
115.2 kbps
Downlink data rate Up to 85,600 bps for packet data communication, using 4 time slots in cod-
ing scheme CS-4
Uplink data rate Up to 21,400 bps for packet data communication, using 1 time slot in coding
scheme CS-4
Mode of operation Class B and Class C modes of operation supported. It is possible for the
user to choose if the Circuit Switched services should be favoured.
R Reference point Physical layer: PPP is supported as L2 layer in the R reference point
Authentication algorithms PAP, CHAP supported
IP connectivity PDP type IP is supported
IP termination in mobile
Application WAP over GPRS supported (UDP/IP and GPRS-SMS)
SMS over GPRS (SMS-MT, SMS-MO) supported
QoS QoS negotiation supported. Default requested QoS sent by the handset at
PDP context activation is reliability Class 3. Peak/Mean/Delay/Precedence
Class: subscribed.
Precedence class supported (1,2,3)
Reliability class 1-5 supported
Delay classes supported (1,2,3,4)
Mean and peak throughput rate limited by multi slot class 4 and CS-4
PDP context 10 PDP context descriptions stored in mobile
PDP context description is edited via application in mobile or via OTA
Simultaneous PDP contexts not supported
Network requested PDP context not supported
SIM GPRS aware, as well as non GPRS aware SIMs are supported
Feature Support in the Z200/Z208
User notification of the reception of a CB message Message displayed on screen
Handling of reception of several unread messages The last message overwrites the previous one
Support of all CBMI from 0 to 65534 Yes
File support CBMI
Support CB SIM data download Yes
Support of all applicable Data Coding Scheme values
as defined in 3G TS 23.038 V3.3.0
Yes
Feature Support in the Z200/Z208