Specifications

ZERO180 Gun System

Warning:

A loaded tube strip can be very heavy, especially

the larger diameter tube strips, and must be handled accordingly to

prevent personal injury, dropping or bending the tube strip!

Caution:

Do not damage or break the Booster Transfer Tube (if

applicable), during insertion! Do not pinch the det cord or Booster

during insertion!

4.14 Slowly slide the loaded tube strip into the carrier. Be careful not to cause any damage to the

components of the loaded tube strip.

Warning:

 Ifanydifcultyisencounteredwhileinserting

thetubestrip,STOPandcheckforthecauseofthedifculty!If

necessary, pull the tube strip back out of the carrier and determine

the problem! Never beat or force a loaded tube strip into a carrier!

4.15 With the End Plate against the Snap Ring at the top of gun, install the bottom Snap Ring. The

loaded tube strip is now secured in the gun body.

4.16 Install the proper top sub or tandem sub at top of gun. Place the size 230 O-rings on the sub.

Apply grease to threads and O-rings of the sub, and thread it into carrier and tighten.

4.17 Install an alignment insert and o-ring (provided in the booster transfer kit) into the sub.

Repeat steps 4.1 – 4.17 for loading and assembling each gun.

4.18 Perform any additional necessary actions to prepare gun(s) for storage or transportation.