Specifications

ZERO180 Gun System

GUN OD MAX. DIAMETER (IN.) MAX. DIAMETER (MM.)

(IN.) (A) (B) (A) (B)

3.125 2.812 2.816 71.42 71.53

The gun subs used with the Owen Threaded Gun Systems are designed for a range of applications

including high pressure and temperature as well as high bending and tensile loads. For high pressure

and temperature applications o-ring backups may be required (refer to Technical Information, O-Ring

Specications for details). It is recommended that each gun sub be tightened to the carrier and

torqued with the appropriate equipment. Refer to recommended torque values below.

RECOMMENDED MAKE UP TORQUE

GUN SYSTEM

MINIMUM MAXIMUM YIELD TORQUE

FT-LBF N-M FT-LBF N-M FT-LBF N-M

3.125 600 814 1650 2239 3300 4478

Example:

T = FXd = 200 lbs.X 3 ft. = 600 lb. ft.

F = Applied Force (lb.)

d = length of the pipe wrench (ft.)