Technical information

12/01/02
WARRANTY INFORMATION
REGISTRATION-
Two warranty registration cards are supplied with the
equipment. They must be completed and sent in to initiate
warranty. The warranty begins on the date of installation if
registration procedures are followed. If registration is not
completed, the warranty date will be the date of sale or
date of shipment from the factory, respectively.
WARRANTY COVERAGE-
The warranty will cover defects in material or workman-
ship under normal and proper use and maintenance
service as specified by Hoshizaki. Coverage for parts and
labor is limited to the repair or replacement of parts or
assemblies that in Hoshizaki's opinion are defective.
COVERAGE CHART-
ITEM PRODUCT PARTS LABOR
Total Unit KM Cuber 3 Years 3 Years
F/DCM 1 Year 1 Year
B/DB/DM 2 Years 2 Years
Bev. Valves 1 Year 1 Year
Compressor & Air- KM Cuber 5 Years 3 Years
Cooled Condenser F/DCM 5 Years 2 Years
Evaporator Plate KM Cuber 5 Years 5 Years
Evaporator, Auger
Gear Motor Assy. F/DCM 2 Years 2 Years
Effective January 1, 1991
See Warranty Statement supplied with the unit for details.
Warranty valid in United States, Canada, Mexico, Puerto
Rico, and U. S. Virgin Islands.
Contact factory for warranty in other countries, territories,
or possessions.
7
12/20/03
2/20/03