Manualshelf

Technical information

ManualsBrandsWhite ManualsSewing MachineSTYLE-MAKER 3100
101102103104105106107108109110
12/01/02
MECHANICAL BIN CONTOL OPERATION:
The mechanical bin control is included on some modelsproduced in 2002. The mechanical assembly is located in the ice drop zone
area .
When the actuator paddle is in the normal (Bin Empty) position, the bin control proximity switch will close.
1. When the switch contacts close, 7.6 K Ohms of resistance is supplied to the K4 board connector.
When ice pushes the paddle to the full right position (Bin Full), the proximity switch opens as shown above.
2. Bin control proximity switch is shown in the Bin Full position and will supply 15.8 K Ohms to the K4 board connector.
110
BIN FULL
BIN EMPTY
12/20/03
2/20/03