Specifications

MODELS 9301, 9302, 9302E, 9303E, 9600, 9601 ONLY
SECTION 2
HOW TO REPAIR AND REPLACE
STEERING
To insure trouble-free operation, use a grease gun and
apply a good quality automotive chassis lubricant
to
the five zerk fittings. (Figure 2-1). Or Lawn-Boy “A”
grease.
A positive type steering system is employed. The steer-
ing arm is keyed to the steering shaft and secured with
a setscrew. The steering gear is linked to the left side
spindle and king pin
arm. A tie rod connects the
wheels.
As you disassemble the front end, watch for bent or
mis-shaped
rods, dry bearings, bearings or bushings
which are damaged, and shafts which are gouged or
grooved.
FIGURE 2-1
SERVICE BULLETIN REFERENCES 11-23
REVISED 1977