Specifications

MODELS 9302E, 9303E ONLY
DIODE
I GROOVED END
DIODE
FIGURE 2-43 FRONT OF MOWER
94256
INSTALLING NEW DIODES
1. Remove diode cover.
2. Insert new diodes into spring clips. DO NOT
FORCE. The groove in the one end of the diode
matches a ridge
in the clip. See Figure 2-43.
INSTALLING REPLACEMENT FUSE
AG AMP 250 Volt Fuse is inserted into
clip receptacle
in vertical position either
end up.
SAFETY WARNING
SONAL INJURY (BURNS) REMOVE
TO PREVENT SPARKS OR PER-
DIODES
IF MOWER IS TO BE OP-
ERATED WITH BATTERY RE-
MOVED OR BATTERY LEADS DIS-
CONNECTED.
SERVICE BULLETIN REFERENCES 11-51
REVISED 1977