Specifications

MODELS 9301, 9302, 9302E, 9303E, 9600, 9601 ONLY
ENGINE REMOVAL
Disconnect spark plug lead and throttle
linkage. Remove rear drive belt.
For Model
9601 also remove 2 cylinder
head
bolts attached to support mounting
plate (Figure
2-40.)
Remove engine mounting bolts and lift engine
from mounting frame.
NOTE
Do not tip engine on its side without
removing oil
and fuel.
DRIVE DISC REMOVAL
Remove engine. Remove four allen head
screws securing disc to drive pulley.
DRIVE PULLEY REMOVAL
Remove engine and drive disc. Remove
single bolt securing drive pulley to keyed
crankshaft and remove pulley.
SERVICE BULLETIN REFERENCES 11-49
REVISED 1977