Specifications

MODELS 9301, 9302, 9302E, 9303E, i9600, 9601 ONLY
15 to 17 lbs., pressure and the drive
roller breaks contact with the drive
disc.
2. Place speed selector lever in neutral
position and re-check the
1/16 inch
clearance between drive disc and, drive
roller.
NOTE
If drive roller slippage is observed,
slightly increase the spring tension
on the secondary (outside) spring.
If quick "jumpy" starts are observed,
decrease spring tension on the pri-
mary (inside) spring.
FIGURE 2-32 04299