Specifications

MODELS 9301, 9302, 9302E, 9303E, 9600, 9601 ONLY
FIGURE 2-27 94332
DRIVE ROLLER ADJUSTMENT-
VERTICAL ALIGNMENT
When the speed selector lever is placed in
neutral position,
the drive roller disengages
from the drive
disc by use of various link-
ages. Proper clearance between drive disc
and drive roller is 1/16 inch with speed
selector lever in neutral. See Figure
2-27.
This assures the operator of a positive
neutral position and performs
a secondary
braking action by halting the chain move-
ment to
the rear wheels.
To obtain the proper 1/16 inch clearance
proceed
as follows:
1. Place speed selector lever in neutral
position.
2. Stand mower on knurfing bar to make
adjustment.
See page 11-41 for steps 3, 4, and 5 for models 9301, 9302, 9302E, 9600.
See page 11-42
for steps 3, 4, and 5 for models 9303, 9303E, 9601.
11-40 SERVICE BULLETIN REFERENCES
REVISED