Specifications

MODELS 9301, 9302, 9302E, 9303E. 9600, 9601 ONLY
MOWER PAN DISASSEMBLY
I 1
REAR BELT REMOVAL
Disconnect spark plug lead. Remove bat-
tery, (electric start models only). Remove
rear cover. Remove belt keeper (Figure
2-11); tighten tilt (knurfing) bar bolts. Stand
mower on
tilt (knurfing) bar.
SAFETY WARNING
SECURE TO WALL TO PREVENT
THE MOWER FROM TIPPING OR
FALLING.
Roll belt off the top intermediate pulley.
Pull
belt between drive disc and drive
roller.
Reassemble in reverse order of disassembly.
PAN REMOVAL
Remove belt, and bell arm shoulder bolts.
Remove front pan suspension bar shoulder
bolts. Pan can now be removed from mower.
FRONT BELT REMOVAL
Disconnect spark plug lead.
NOTE
Use
a rope as shown on Figure 2-10
when removing
idler spring.
Remove
belt.
Reassemble in reverse order of disassembly.
IDLER ARM REMOVAL
FIGURE 2-11
94181
~-
Remove belt. Remove belt pulley. Remove
and replace
idler arm. (See Figure 2-9.)
SERVICE BULLETIN REFERENCES 11-29
REVISED 1977