User manual

Section 3- Applications
recommended that cuvettes be removed from the instrument prior to making a pedestal
measurement to ensure that the pedestal arm can move to the proper starting position.
7. Enter a sample ID in the appropriate field, load the first sample as described for the blank above and click
Measure.
Note: A fresh aliquot of sample should be used for each measurement.
After the measurement:
- Simply wipe the upper and lower pedestals using a dry laboratory wipe and the instrument is ready to
measure the next sample.
- When using the cuvette option, remove the cuvette, rinse thoroughly and dry between samples.
3-15